How To Jailbreak iOS 13.5 Using Unc0ver In 2020 [Step-by-Step Guide]

Here is how you can jailbreak iOS 13.5 with the latest version of the Unc0ver jailbreak tool. This tutorial explains an easy way to jailbreak iPhone or iPad. See a step-by-step guide below to learn how to use unc0ver 5.0.0 or unc0ver 5.0.1 to jailbreak iOS 13.5 or iPadOS 13.5.

Anyone can follow the instructions to free their A12(X)-A13 powered device running on iOS 13 or later to fully customize their Apple iPhone, iPad, or iPod touch.

This guide will help you jailbreak iPhone and iPad running on iOS 13.5 or iPadOS 13.5 firmware using unc0ver jailbreak tool.

If you find the method below a bit too complicated, here is a quick way to jailbreak iOS 13.5 without PC.

Jailbreaking with unc0ver not only liberates your device from the restrictions of stock firmware but you also get additional benefits of jailbreak using tweaks and exploits.

Table of Contents

Unc0ver 5.0.0 / 5.0.1 Jailbreak For iOS 13.5:

Unc0ver is a jailbreak, which means that you can have the freedom to do whatever you would like to do to your iOS device. Allowing you to change what you want and operate within your purview, unc0ver unlocks the true power of your iDevice.

The latest version of unc0ver jailbreak works on every version of iOS firmware that is signed by Apple.

It is compatible with all the devices that run on the supported operating system.

The unc0ver 5.0.1 jailbreaks iPhone and iPad powered with A12 and A13 processors.

The unc0ver 5.0.0 works with iOS 11.0 – iOS 13.5 but is not compatible with iOS 12.3-12.3.2 and iOS 12.4.2-12.4.5 at the time of this writing.

Although Apple has quickly released iOS 13.5.1 to kill the unc0ver support if you managed to avoid auto-update to the newly released update, your device should have no problem running this jailbreak.

It is important to note that jailbreaking devices powered by A11 or older processors running the latest version of iOS or iPadOS require the checkra1n tool.

Those planning to jailbreak should update to the iOS/iPadOS 13.5 to get their devices ready for the unc0ver 5.0.0 or unc0ver 5.0.1 fully integrated versions.

See below a step-by-step guide to jailbreak iOS 13.5 on all devices with unc0ver 5.0.0 tool.

Discover More:

Unc0ver For iOS 13 Compatible Devices:

You can use the unc0ver 5.0.0 / 5.0.1 to jailbreak iPhone 11, iPhone 11 Pro Max, iPhone SE, iPad 2020, and other Apple’s smartphones powered by A12(X)-A13 processor.

iPad users can also use unc0ver latest version to jailbreak iPadOS 13.5 on Apple tablets.

However, the older devices with A11 or earlier SoC are not supported yet. Therefore, you can use checkra1n jailbreak to jailbreak iOS 13.5 instead.

How To Use Unc0ver 5.0.0 To Jailbreak iOS 13.5 On iPhone & iPad:

This method requires you to have an active Apple Developer Account ID. If you don’t have access to one, use the AltStore method below.

Step 1: Make sure that your device is running a compatible version of the iOS firmware. You would need iOS 13.5 IPSW to install a jailbreak compatible firmware on your device if it’s running any other version.

Step 2: When ready, download unc0ver 5.0.0 IPA or unc0ver 5.0.1 IPA from this link here.

Step 3: Download the Cydia Impactor tool on your PC Windows or Mac from the official source: cydiaimpactor.com.

Step 4: Disable Find My iPhone feature. You can turn it back on after the jailbreak.

Step 5: Also, make sure that there is no OTA firmware update yet to be installed. Head over to Settings > Storage and delete (if there is).

Step 6: Disable passcode on the device.

Step 7: Enable Airplane Mode and connect your iOS device to a computer.

Step 8: Launch Cydia Impactor. This tool sideloads unc0ver IPA on your device.

Step 9: Now drag and drop the unc0ver jailbreak IPA file onto the interface of the Cydia Impactor tool. If you use two-factor authentication, you would have to create a dedicated password for the app by heading over to appleid.apple.com and use it in Cydia Impactor.

Step 10: Next, go to Settings > General > Device Management and tap on the profile which shows your Apple ID. Once done, trust the profile linked to the unc0ver app that you used for sideloading.

Step 11: Once that is done, launch the unc0ver app from the Home screen.

Step 12: Right at the center of the app’s interface you will see the “Jailbreak” button. Tap on it.

Step 13: Now wait for the tool to complete the jailbreak process in the background. Your device might reboot/respring several times during the process.

Step 14: In the middle of the jailbreak, you will be prompted to take certain actions, simply tap OK to continue.

Step 15 – Your device will reboot several times during the process or re-signed a few times. If this happens, launch the unc0ver app and once again hit the “Jailbreak” button.

Step 16 – When the jailbreak is completed, you will see the Cydia icon on the Home screen after one final respring.

Step 17 – That’s it. You are now set to install jailbreak tweaks and utilities to enjoy on your device.

Jailbreak iOS 13.5 Using AltStore

If you don’t have an Apple Developer Account, follow these steps to jailbreak iOS 13.5 on iPhone or iPad:

Step 1- Download AltStore latest version.

Step 2 – On Mac, you need to right-click on the AltStore icon in the menubar and install the Mail plug-in.

Step 3 – Now open the Mail app, head over to its Preferences > Manage Plug-ins, and allow AltPlugin to run on your device. Once done, restart the Mail app.

Step 4 – Connect your iPhone or iPad to your computer using a lightning cable.

Step 5 – Hit the AltStore icon and click on Install AltStore.

Step 6 – Enter your Apple ID username and password when prompted.

Step 7 – When the installation is complete, navigate to Settings > General > Device Management and tap Altstore > Trust.

Step 8 – Now download unc0ver 5.0.0 using Safari and install it using the AltStore app.

Step 9 – After the completion of the installation process, open the unc0ver app to jailbreak iOS 13.5 on your device.

Step 10 – Wait as your device reboots/resprings after which it will be ready to install tweaks and utilities.

Step 11 – All done.