Download and Install Android Oreo 8.0 on AT&T Galaxy S7/S7 Edge (SM-G930A/SM-G935A)

Here you can Download Android 8.0 Oreo Firmware for AT&T Galaxy S7 and S7 Edge along with the instructions on how to install stock Oreo firmware on your smartphone. The Android Oreo OTA update for the AT&T S7 and S7 Edge is available to download on compatible variants. This update features the latest Samsung Experience 9.0 for the Galaxy S7 & S7 Edge. If your device hasn’t received the OTA update, or its rooted, or you prefer manual installation via Odin to avoid issues later, then we have a good news for you. Here you can find all the firmware files to install Android Oreo Firmware build number G930AUCU4CRE4 on AT&T Galaxy S7 (SM-G930A) and Galaxy S7 Edge (SM-G935A).

android 8.0 oreo for at&t galaxy s7 and s7 edge

Android 8.0 Oreo is a major upgrade for the owners of relatively older Galaxy S7 and S7 Edge. In case you are an owner of the Version Galaxy S7 or S7 Edge and want to update your phone, you should follow this guide instead. The SIM-free variants of the phone received the update last month. Users of the AT&T and Verizon models reported receiving the OTA update only a few days ago. To check the Android Oreo availability on your device, go to Settings > About Device and tap on the Software updates option.

Kindly be informed that this update does not support rooted AT&T Galaxy S7/S7 Edge, and outside the United States. Moreover, all system apps on non-rooted AT&T Galaxy S7 and S7 Edge must be enabled to get the official OTA update. However, if you don’t satisfy any of these conditions, there is another way to flash Android 8.0 Oreo Stock Firmware on AT&T Galaxy S7 and S7 Edge. This method involves using the stock firmware files and install them using Odin flashing tool as explained in the following tutorial. You can also use this guide to restore your phone to stock or to fix bootloop and slow performance issues.

AT&T Galaxy S7/S7 Edge Oreo Update Features

Android Oreo is a marked improvement over the previous Nougat firmware. It brings lots of new UI tweaks, better features, as well as security and performance enhancements. Here is a list of some of its main features:

  • Samsung Experience 9.0
  • Samsung SmartThings App
  • Several new UI tweaks
  • Password Autofill manager
  • High-contrast keyboard
  • Dual Messenger to use two accounts. You can use 2 Whatsapp accounts on the same phone.
  • Revamped phone app UI
  • Picture-in-Picture mode
  • Limit background processes to save battery life
  • and much more…

Download AT&T Galaxy S7/S7 Edge Android 8.0 Oreo

AT&T Galaxy S7 (SM-G930A)

Download and extract GG930AUCU4CRE4_Oreo.zip on your computer to get the firmware files with .tar.md5 extension. There should be 4 files inside the zip folder as mentioned below.

  • AP_G930AUCU4CRE4_CL13527040_QB18162296_REV02.md5 (add ‘.tar‘ just fore “.md5” before installing)
  • BL_G930AUCU4CRE4_CL13527040_QB18162296_REV02.tar.md5
  • CP_G930AUCU4CRE4_CP9711955_CL13527040_QB18162296_REV 02.tar.md5
  • CSC_ATT_G930AATT4CRE4_CL13527040_QB18162296_REV02.tar.md5

Android Oreo Firmware | Download Link

AT&T Galaxy S7 Edge (SM-G935A)

Download G935AUCU4CRE4_Oreo.zip from the link below and extract it on your computer to get the following 4 firmware files with .tar.md5 extension.

  • AP_G935AUCU4CRE4_CL13527040_QB18162197_REV02.md5 (add ‘.tar‘ just fore “.md5” before installing)
  • BL_G935AUCU4CRE4_CL13527040_QB18162197_REV02.tar.md5
  • CP_G935AUCU4CRE4_CP9711957_CL13527040_QB18162197_REV 02.tar.md5
  • CSC_ATT_G935AATT4CRE4_CL13527040_QB18162197_REV02.tar.md5

Android Oreo Firmware | Download Link

Install Android 8.0 Oreo on AT&T Galaxy S7 & S7 Edge

Here is a step-by-step guide to install Android 8.0 Oreo stock firmware on AT&T Galaxy S7 or S7 Edge.

1 – Download Odin v3.13.1 flashing tool and unzip it on your computer.

2 – Make sure latest Samsung USB Drivers are installed on your PC.

3 – Navigate to Settings > Developer option and enable USB debugging option on your Samsung Galaxy S7.

4 – Backup all apps and phone data before flashing the firmware so it can be restored later if anything goes wrong during the flashing process.

5 – Turn off your Samsung Galaxy S7 or S7 Edge.

6 – Boot it into the Download or Odin mode by pressing and holding the Volume Down + Home + Power keys at the same time for a few seconds and release them when you see an exclamation sign on the screen. After that, press the Volume Up key to enter the Download mode.

7 – Now launch the Odin flashing tool on your computer.

8 – Connect your phone to a computer via the original Samsung USB cable.

9 – When connection is properly established, the ID:COM port on Odin turns Blue.

10 – Now click the BL button on Odin, go to the folder where you saved the firmware files on PC and add the BL file with the .tar.md5 extension.

11 – Similarly, click the AP, CP, and CSC buttons and select the respective AP, CP and CSC firmware files with .tar.md5 extension in their specific locations in Odin.

12 – Once all the files are added, this is what the Odin interface should look like.

odin file flashing

13 – Now click the Start button and wait for the process of new firmware installation to complete.

14 – Once done, you will see PASS! message in Odin and your phone will reboot automatically.

15 – The first reboot could take about 5-10 minutes, so be patient as new files and setup process finishes in the background. In the end, disconnect the USB cable to remove your phone from PC

That’s all. Enjoy the new Android 8.0 Oreo build AUCU4CRE4 on your AT&T Galaxy S7 or S7 Edge. For further assistance, drop your questions in the comments section.

Be the first to comment

Leave a Reply

Your email address will not be published.


*